How to re -calibrate the battery of switch 2

The Nintendo Switch 2 It improves the original model in many ways, including a larger screen, more powerful internal and other features such as mouse and gamechat control. However, many users find that the battery seems to drain quickly and much faster than their original switch.

Related

Nintendo Switch 2: How to synchronize controllers

Because your friends prefer to use your own controller for SMASH NIGHTS.

If you notice the battery discharge faster than usual, don't worry. Most likely there is a problem with the battery display and not necessarily the battery itself. Fortunately, it is easy enough to correct, which we will show you how to do it below.

Should you calibrate the battery?

First of all, it is important to understand why your battery recalibration would be necessary. Be clear With the battery itself is most likely nothing wrong withand instead Battery charging indicator incorrectly shows incorrect charging level.

This is a common enough problem with lithium-ion batteries and a problem Usually it works over time. This means that the use of switch 2 normally will be Slowly recalibrate the battery separatelyFinally, it appears correctly.

This means that exists No harm while manual battery overlap If you suspect it may be inaccurate, continue as needed.

How to re -calibrate the battery of switch 2

If you do not want to wait for the batteries to reload from normal use, you can Run the battery manually. You want to do it, follow these steps.

1. Hold the power button, select the power options, and then turn off Fully turn off the switch 2.

2. Hold both Increase in volume and volume buttonsand Press the power button once Introduce the system into Recovery.

3. Simply The introduction of the device into the recovery mode should solve the calibration problemPress the power button again to turn off.

4. Tighten the device back and check the battery indicator.

If you see the difference in the battery indicator, your battery is successfully recalibrated. If you do not see the difference, it is possible that it has already been correctly calibrated.

If you still have battery problems, there is probably time Send it to repair.

Other

Steam DECK: How to take Screenshots and upload video

Here's how to make screenshots and record video clips on Steam Deck and then transfer them.