Your MacBook and your phone should not be in custody on one plug. But that's exactly what happens every time you are traveling with a sad little adapter since 2016. You connect, power drops, things warm up, and suddenly watch your charger more than your real devices. It's not just ineffective, it's a bad look, especially when you are more devices that all need juice now.
Related
I found 9 small intelligent gadgets that cost less than pizza but I feel like a witch
Nine aids under $ 30 that press the buttons, stop leaks and throw disco lights. News of the year.
Gan Chargers will fix it. They are smaller, cooler and smarter to divide force where it is needed. Some even hit 140W without breaking sweat, while others throw multi-potkol support, so all Android, iPhone, MacBook and Steam Deck all feel the same beloved. If you are done with bulky bricks and drama adapter, these tips are upgraded that your device deserves.
7
Anker 737 adapter
The Anaker has been selecting No. 1 for all things that are charging for many people, and 737 is a great example of why. This has two USB-C and USB-A ports, with a total of 120 W. Either the USB-C port hits 100 W if it's the only thing, and the USB-A culminates at approximately 22.5 W for older devices. An interesting bit happens when you start involving multiple things – Poweriq 4.0 actually finds out what each device needs and moves the power accordingly.
The Activeshield 2.0 controls temperatures approximately 35 times per second, using some fantastic NTC sensor settings, which is likely to explain why this thing is never disconnected. At 187 grams, Apple bricks are about 39% less than 96 W, although it doesn't say much, because Apple chargers are notorious.
They include this small silicone wall strut to prevent the charger from sagging from free outlets, which is a nice touch. It is not the cheapest option, but the Anaker reliability factor usually replaces the bonus.
Buy it here
6
Ugreen Nexode adapter
Ugreen managed to cram 140W into the wall charger, which means that you can finally rug the massive energy brick for something that does not require its own luggage compartment. The port setting is two USB-C plus one USB-A. C1 processes the entire 140 W using PD 3.1 at 28 V and 5A, while the C2 culminates at 100 W per PD 3.0. USB-A makes 22.5 W with quick support. When you use multiple ports, it is intelligent about energy-65W + 65W for dual USB-C or 120W + 18W if you mix C1 with USB-A.
The support of the protocol is quite complex: PD 3.1 with EPR, PPS from 3.3-21V, fast charge 4/4+, Samsung PPS and Apple 2.4A Standard. In principle, if your device is charged, it will charge it correctly. The temperature of the Ugreen thermal Guard system 5 times per second and begins to support energy at 85 ° C. This is more aggressive monitoring than most chargers are bothering, which probably explains why people do not report overheating problems.
At 300 grams it is a bit of highly than 737, but also includes a 5-foot EPR cable in a volume that is worth $ 20-30.
5
Buy it hereBaseus Gan5 Pro adapter
Baseus has been making a decent charging device quietly for some time and their GAN5 140W charger is probably their best effort. The title number here charges MacBook Pro 16 “in about 1 hour 20 minutes, according to their demands.
The standard port distribution includes two USB-C, one USB-As C1 supporting PD 3.1 at 28 V and 5A for full 140 W. The adapter is only 357 grams, making it one of the high power options. The cable included is 1 meter USB-C with EPR.
.
They also integrated something called BCT (Baseus Cooling Tech), which uses thermal boards with a double steam chamber, so you get better heat distribution. Branded, they did not develop enough to go on their feet on their feet with similar polo, but for themselves they are constantly building a representative and this adapter is a nice reminder.
4
Buy it hereSatechi 165 W Station
Satychi captivated a different approach here – instead of cramming everything into the wall wart, they built the right charging station on the desktop. Four USB-C ports, no USB-A, with 2 meters of Figure-8 cable that connects to the wall.
The energy distribution is complex with four ports. If you use only one port, it will push 100 W without breaking sweat. Two devices connected to you get 100 W plus 60W. Things are more interesting with three or four ports occupied – you can see 60W + 60W + 45W, or sometimes 100W + 30W + 30W, depending on what is connected. Mathematics works so that it can easily handle MacBook Pro when your iPad, iPhone and AirPods remain happy.
Inside uses GanFast Navitas NV6136 chips with about 94% peak efficiency. The main body weighs 340 grams and also includes a plastic stand for vertical orientation. However, the values are not foldable, which gives the things damping.
3
Buy it hereSpigen ArcStation for
SPIGENA input focuses on doing two ports really well than on a crashing into other connectors. Both USB-C ports are identical and can handle 140 W solo using PD 3.1 at 28 V and 5A or 100 W using PPS from 3.3-21V at 5A.
When you use both ports, the power supply to 67 W + 60W a total of 127 W has been divided. This is actually an intelligent allocation – enough to quickly charge the MacBook Pro on one port while correcting the iPad or the phone on the other.
The physical dimensions are 30 × 73 × 73 mm at 325 grams with folding American tips, and this is definitely on the heavy side for the wall charger. No other remarkable functions as such, but it is one of the more affordable 140 W options, especially with regard to net supply of energy and fixed assembly.
2
Buy it hereBelkin Boostcharge for
Belkin went with the format of the desktop computer here-no folding spikes that were not supposed to sit on the table with 2 meters of cords, as well as Satychi. We have four ports: two USB-C with PD 3.0 and two USB-A, which share 12W between them.
The total energy budget is 108 W with what Belkin calls “intelligent energy sharing”, even if they do not publish the exact division. It is certainly a greater presence and the added weight comes from partly from the attached 2 meters of the cable, but even for being a big piece of hardware.
The main limitation is that the total ceiling of 108 W. Sure, it is enough for most settings, but if you need to charge more high -performance devices at the same time, you will hit the limit quite quickly.
We also have a two -year standard Belkin warranty, plus $ 2,500 to cover the guarantee of the connected device. This means that if their charger borders your laptop in some way, it will cover up to $ 2,500. Most companies do not give their money where their mouths are such, so massive props to Belkin for it.
Buy it here
1
Voltme revo adapter
Voltme is less introduced than some other brands, but their Revo 140W won the CES 2023 Innovation Honoree in the Notebook Accessories category, which means they are doing something right.
You get a standard distribution of three ports with two USB-C and one USB-A, driven by Gan III technology and what they call “logic v-dynamic energy”. The dimensions are based on about 3.05 × 1.24 × 2.89 inches, weighing 289 grams – it's not bad for something that pushes 140 W.
They also created support for almost every charging standard you would like: PD 3.1 EPR for heavy lifting, fast charge 5 for newer Android phones, PPS, which goes up to 100 W and some other protocols such as SCP and PE2.0, so your random devices are correctly charged. Having QC 5 and PD 3.1 in the same charger is still relatively unusual, so points for the officing of the future.
Buy it here
More
This bank and charger of the anker notebooks are for the players of the energy pair
The Anker's Laptop Power Bank and 140W USB-C charger give unrivaled performance and comfort for gaming handkerchiefs, laptops and other basic devices.
FAQ
Q: What is the agreement with EPR cables? Do I need one?
If your charger goes over 100 W (especially with PD 3.1), you will need a cable with EPR. Otherwise, you basically try to bring a fire hose with straw. Most good chargers include one. If they don't, it means we're looking at the wrong place.
Question: Why do some chargers divide strangely when more ports are used?
Because there is only so much power. Most decent chargers use dynamic performance allocation to give each device what it needs, but some ports with strangles when others are greedy. It's not a mistake, it's physics.
Q: What is Gan and why should I be interested?
Gan (Nitrid Gallia) is a semiconductor material that is more effective than traditional silicon. It allows chargers to supply higher power in a smaller shape factor with less heat production. This means that GAN chargers can be more compact, faster and cooler compared to standard silicon -based models.
